Upload frp/frpc_full.ini with huggingface_hub

frp/frpc_full.ini

@@ -0,0 +1,223 @@
+# [common] is integral section
+[common]
+# A literal address or host name for IPv6 must be enclosed
+# in square brackets, as in "[::1]:80", "[ipv6-host]:http" or "[ipv6-host%zone]:80"
+server_addr = 0.0.0.0
+server_port = 7000
+
+# if you want to connect frps by http proxy or socks5 proxy, you can set http_proxy here or in global environment variables
+# it only works when protocol is tcp
+# http_proxy = http://user:[email protected]:8080
+# http_proxy = socks5://user:[email protected]:1080
+
+# console or real logFile path like ./frpc.log
+log_file = ./frpc.log
+
+# trace, debug, info, warn, error
+log_level = info
+
+log_max_days = 3
+
+# for authentication
+token = 12345678
+
+# set admin address for control frpc's action by http api such as reload
+admin_addr = 127.0.0.1
+admin_port = 7400
+admin_user = admin
+admin_pwd = admin
+
+# connections will be established in advance, default value is zero
+pool_count = 5
+
+# if tcp stream multiplexing is used, default is true, it must be same with frps
+tcp_mux = true
+
+# your proxy name will be changed to {user}.{proxy}
+user = your_name
+
+# decide if exit program when first login failed, otherwise continuous relogin to frps
+# default is true
+login_fail_exit = true
+
+# communication protocol used to connect to server
+# now it supports tcp and kcp and websocket, default is tcp
+protocol = tcp
+
+# specify a dns server, so frpc will use this instead of default one
+# dns_server = 8.8.8.8
+
+# proxy names you want to start divided by ','
+# default is empty, means all proxies
+# start = ssh,dns
+
+# heartbeat configure, it's not recommended to modify the default value
+# the default value of heartbeat_interval is 10 and heartbeat_timeout is 90
+# heartbeat_interval = 30
+# heartbeat_timeout = 90
+
+# 'ssh' is the unique proxy name
+# if user in [common] section is not empty, it will be changed to {user}.{proxy} such as 'your_name.ssh'
+[ssh]
+# tcp | udp | http | https | stcp | xtcp, default is tcp
+type = tcp
+local_ip = 127.0.0.1
+local_port = 22
+# true or false, if true, messages between frps and frpc will be encrypted, default is false
+use_encryption = false
+# if true, message will be compressed
+use_compression = false
+# remote port listen by frps
+remote_port = 6001
+# frps will load balancing connections for proxies in same group
+group = test_group
+# group should have same group key
+group_key = 123456
+# enable health check for the backend service, it support 'tcp' and 'http' now
+# frpc will connect local service's port to detect it's healthy status
+health_check_type = tcp
+health_check_interval_s = 10
+health_check_max_failed = 1
+health_check_timeout_s = 3
+
+[ssh_random]
+type = tcp
+local_ip = 127.0.0.1
+local_port = 22
+# if remote_port is 0, frps will assign a random port for you
+remote_port = 0
+
+# if you want to expose multiple ports, add 'range:' prefix to the section name
+# frpc will generate multiple proxies such as 'tcp_port_6010', 'tcp_port_6011' and so on.
+[range:tcp_port]
+type = tcp
+local_ip = 127.0.0.1
+local_port = 6010-6020,6022,6024-6028
+remote_port = 6010-6020,6022,6024-6028
+use_encryption = false
+use_compression = false
+
+[dns]
+type = udp
+local_ip = 114.114.114.114
+local_port = 53
+remote_port = 6002
+use_encryption = false
+use_compression = false
+
+[range:udp_port]
+type = udp
+local_ip = 127.0.0.1
+local_port = 6010-6020
+remote_port = 6010-6020
+use_encryption = false
+use_compression = false
+
+# Resolve your domain names to [server_addr] so you can use http://web01.yourdomain.com to browse web01 and http://web02.yourdomain.com to browse web02
+[web01]
+type = http
+local_ip = 127.0.0.1
+local_port = 80
+use_encryption = false
+use_compression = true
+# http username and password are safety certification for http protocol
+# if not set, you can access this custom_domains without certification
+http_user = admin
+http_pwd = admin
+# if domain for frps is frps.com, then you can access [web01] proxy by URL http://test.frps.com
+subdomain = web01
+custom_domains = web02.yourdomain.com
+# locations is only available for http type
+locations = /,/pic
+host_header_rewrite = example.com
+# params with prefix "header_" will be used to update http request headers
+header_X-From-Where = frp
+health_check_type = http
+# frpc will send a GET http request '/status' to local http service
+# http service is alive when it return 2xx http response code
+health_check_url = /status
+health_check_interval_s = 10
+
+[web02]
+type = https
+local_ip = 127.0.0.1
+local_port = 8000
+use_encryption = false
+use_compression = false
+subdomain = web01
+custom_domains = web02.yourdomain.com
+
+[plugin_unix_domain_socket]
+type = tcp
+remote_port = 6003
+# if plugin is defined, local_ip and local_port is useless
+# plugin will handle connections got from frps
+plugin = unix_domain_socket
+# params with prefix "plugin_" that plugin needed
+plugin_unix_path = /var/run/docker.sock
+
+[plugin_http_proxy]
+type = tcp
+remote_port = 6004
+plugin = http_proxy
+plugin_http_user = abc
+plugin_http_passwd = abc
+
+[plugin_socks5]
+type = tcp
+remote_port = 6005
+plugin = socks5
+plugin_user = abc
+plugin_passwd = abc
+
+[plugin_static_file]
+type = tcp
+remote_port = 6006
+plugin = static_file
+plugin_local_path = /var/www/blog
+plugin_strip_prefix = static
+plugin_http_user = abc
+plugin_http_passwd = abc
+
+[secret_tcp]
+# If the type is secret tcp, remote_port is useless
+# Who want to connect local port should deploy another frpc with stcp proxy and role is visitor
+type = stcp
+# sk used for authentication for visitors
+sk = abcdefg
+local_ip = 127.0.0.1
+local_port = 22
+use_encryption = false
+use_compression = false
+
+# user of frpc should be same in both stcp server and stcp visitor
+[secret_tcp_visitor]
+# frpc role visitor -> frps -> frpc role server
+role = visitor
+type = stcp
+# the server name you want to visitor
+server_name = secret_tcp
+sk = abcdefg
+# connect this address to visitor stcp server
+bind_addr = 127.0.0.1
+bind_port = 9000
+use_encryption = false
+use_compression = false
+
+[p2p_tcp]
+type = xtcp
+sk = abcdefg
+local_ip = 127.0.0.1
+local_port = 22
+use_encryption = false
+use_compression = false
+
+[p2p_tcp_visitor]
+role = visitor
+type = xtcp
+server_name = p2p_tcp
+sk = abcdefg
+bind_addr = 127.0.0.1
+bind_port = 9001
+use_encryption = false
+use_compression = false